1. Drill hole for clock
fitting through center of plywood
2. Paint back and sides of plywood (I prefer black).
3. Make mosaics by running clay through a pasta machine to make
a thin, even sheet. Bake and cut into squares or shapes while
still warm.
4. Working in sections, lay a thin coat of glue onto the plywood
and begin pressing your mosaic tiles down, leaving spaces for
grout. Allow glue to dry.
5. When done, cover piece with grout (you can be messy, because
you'll then wipe off the excess with a damp cloth)
6. Attach clock mechanism to plywood.
7. Add a couple screws onto the back for attaching hanging wire
and voila, you're done!
